Post by popatachi on Jan 2, 2015 4:47:09 GMT
Here's my storage solution.
I got these Sterilite totes idea from Wild Scar and these work great!
Sterilite Totes from Target
From Home Depot I picked up:
Galvanized roof flashing. 10' x 10" ~ $10
Snips ~$10
Duct tape ~ $2
Glue ~$2
The container is roughly 10" x 13" but the bottom is slightly smaller. I cut the sheets to 9 3/4" x 12 3/4" and flattened them by rolling them around a gallon paint can.
Apply duct tape to one side and fold over to dull any sharp edges.
Add glue and press down with weights. I added blocks underneath the container because it has small corner legs that won't let the bottom sit flush. I let it sit for 24 hours.
And the finished product. It's working great with my test models.
I got these Sterilite totes idea from Wild Scar and these work great!
Sterilite Totes from Target
From Home Depot I picked up:
Galvanized roof flashing. 10' x 10" ~ $10
Snips ~$10
Duct tape ~ $2
Glue ~$2
The container is roughly 10" x 13" but the bottom is slightly smaller. I cut the sheets to 9 3/4" x 12 3/4" and flattened them by rolling them around a gallon paint can.
Apply duct tape to one side and fold over to dull any sharp edges.
Add glue and press down with weights. I added blocks underneath the container because it has small corner legs that won't let the bottom sit flush. I let it sit for 24 hours.
And the finished product. It's working great with my test models.
