Grendal
New Member
Megaverse Ambassador
Posts: 32 
|
Post by Grendal on Jan 5, 2015 21:05:32 GMT
I am really struggling to pose my Pods, any one have suggestions? I cant get them to stand together without both feet crowding together. I have the same problems with the Destroids. Any Tips for what I am doing wrong?
|
|
|
|
Post by popatachi on Jan 5, 2015 21:21:45 GMT
I don't think the pods were meant to be standing. I ran into the same issue as you and it seems like they were all meant to have running or walking poses. The only "standing" legs that I found were on the recon pod.
As for the destroids, you should widen their legs so they aren't too vertical. the legs can be spread out more and you shouldn't be bumping feet.
|
|
|
|
Post by Jaymz on Jan 6, 2015 0:22:58 GMT
Actually I have one pod from each sprue standing. I didn;t want any flying.
|
|
|
|
Post by Jaymz on Jan 6, 2015 0:23:24 GMT
|
|
|
|
Post by Galahad on Jan 6, 2015 2:49:37 GMT
the straight legs are meant to be running or striding with one foot in front of the other, but a couple bends at the joints can spaly them out a bit. I also like mixing the wide-stance legs with normal legs to make things more dynamic
|
|
|
|
Post by robotek19 on Jan 6, 2015 8:08:30 GMT
 As mentioned before there is one set of legs that's designed for standing. You can see the one in the back left. If you need a better pic let me know. |
|
|
|
Post by captkaruthors on Jan 6, 2015 21:54:52 GMT
I usually will mix and match the legs from the sprues to get a desired pose. Play around with the different legs. They are also fairly easy to shape and bend into new positions if you are careful.
|
|
